In MatrixStore hub and hub+'s you can find the hardware components described below.

If you are supplying the hardware for the hub, it should match the described specs and fully supported by Linux (in case you want to build a Linux hub) and if you want to have reliable performance.

You can also run the hub on a lower spec or virtual machine but it should be used for proof of concept purposes, rather than in production.


Important Note: If you provide the server (physical or virtual) for a Linux hub, you must prepare it with Ubuntu Server 14.04.3 without any internet access (to avoid any updates), before Object Matrix installs any software.


 

Chassis

Supermicro platforms: 1U size

 

Motherboard

Supermicro X9DRW-iTPF

Processors

hub+ and Windows hub+: Dual Intel E5-2650 V2 8-Core 2.60Ghz

hub and Windows hub: Dual Intel E5-2609 V2 4-Core 2.50Ghz


Memory

16GB

 

System Disks

Dual SanDisk Z400 128GB


Networking

10GigE SFP+ or 10GigE RJ45

 

Operating System

hub and hub+: customised Ubuntu Server 14.04.3

Windows hub and hub+: Windows 7 or Windows Server 2008 R2

 

Software

hub and hub+: MatrixStore hub with Samba

Windows hub and hub+: InterConnect and/or move2